Sitemap

Amicuk Programming Answers

Replication of Mac-Address in HA WLC 5508

-0001-11-30   Views:3

Advertisement

Hi, we have two 5508 WLC and they are in HA,  1)just wanted to know whenever i add new user mac address to the Primary WLC, then how it will replicate to Secondary WLC.  1)if BOX TO BOX connectivity is not there ( other is connected to LAN) Then how

Hi,
we have two 5508 WLC and they are in HA, 
1)just wanted to know whenever i add new user mac address to the Primary WLC, then how it will replicate to Secondary WLC. 
1)if BOX TO BOX connectivity is not there ( other is connected to LAN) Then how we can achieve HA.

The replay answer
Advertisement
Hi Sudhir,
In Box to Box connection: Controllers have a dedicated HA(Redundency) port, which is used to synchronize configuration between controllers in the Active and Standby states.
The redundancy port is used for configuration, operational data synchronization, and role negotiation between the primary and secondary controllers.
Bulk configuration during boot up and incremental configuration are synched from the Active WLC to the Standby WLC using the Redundant Port.
Hope it helps.
Regards
Dont forget to rate helpful posts

Go to See the other 5 answers

Replication of Mac-Address in HA WLC 5508

Category:DefaultRelease time:-0001-11-30Views:130

Hi, we have two 5508 WLC and they are in HA,  1)just wanted to know whenever i add new user mac address to the Primary WLC, then how it will replicate to Secondary WLC.  1)if BOX TO BOX connectivity is not there ( other is connected to LAN) Then how[More]

Simple : Which src MAC address when WLC bridges 802.11to 802.3 ?

Category:DefaultRelease time:-0001-11-30Views:130

When a WLC bridges 802.11 to 802.3, after extracting the original 802.11 frame from LWAPP, does it put the 802.11 senders MAC address as the source addr in the new 802.3 frame ? Or does it put the WLC's AP manager interface ? (Or the WLC's Management[More]

Converted 1140 AP can't join the WLC 5508

Category:DefaultRelease time:-0001-11-30Views:130

Hello! Please, help me to sort my problem out. We have bought autonomous APs   AIR-AP1141N-E-K9 and converted them to the lightweight mode, but they cannot join the WLC 5508. The errors are below. There were NO problems with the LAPs that were bought[More]

Allowing only a list of mac addresses to connect to the internet?

Category:DefaultRelease time:-0001-11-30Views:130

Hi, I'm setting up a solution, where access to wireless internet is granted only to a list of mac addresses. It seems MAB security is what I am after. However, before mac address is allowed internet access, I want a user to go through an external and[More]

Cisco wlc2504 mac address filtering

Category:DefaultRelease time:-0001-11-30Views:130

I am using a wlc2504 software version 7.4.100.0. I use MAC filtering for wireless device to connect to our wi-fi. Currently I have about 249 saved MAC address that can access the wi-fi. About once a week, the controller looses or forgets 3-5 MAC addr[More]

Wlc 5508 invalid ipad mac address

Category:DefaultRelease time:-0001-11-30Views:130

Hello, Help me pls, While configuring mac address filter on a WLC 5508 there is problem with mac address beginning with 77:.... I cant add it to WLC mac filter. Thanks in advanceIf you are using dot1x then no, the mac address is sent since the client[More]

ISE and WLC 5508 IP and MAc address

Category:DefaultRelease time:-0001-11-30Views:130

Hi! Is it possible that we recibe IP address and Mac address Client at the same time in ISE ? The wlc permits choose radius Call station ip type MAC or IP, but not both. Thanks you,If you are using dot1x then no, the mac address is sent since the cli[More]

WLC 5508, vlan select, reserved address in external DHCP server

Category:DefaultRelease time:2015-10-11Views:130

Hi guys, I have a deploy with a WLC 5508 version 7.0.116.0, APs mode local and vlan select feature enable. The issue is that the reserved IP address in external DHCP server not work. The DHCP contains a reserved IP address associates with mac address[More]

IPhones not taking ipv4 addresses on Unified Wireless (WLC 5508 and AP 3602)

Category:DefaultRelease time:-0001-11-30Views:130

This is a really odd one... Earlier this week we started having issues with our BYOD wireless network (802.1x, WPA2+AES) but only with Apple devices (iphone and ipad). Employees with Android or Windows phones are not having any problems at all. A bri[More]

IP-MAC Binding for WLC-5508

Category:DefaultRelease time:-0001-11-30Views:130

Hello! I am having problem in configuring wlc 5508, in a security option i applied mac-filtering and it works fine. Now I need to configure ip-mac address binding, i tried both with gui and cli method but it is not working. While configuring mac-filt[More]

[Ask] How to restriction number of mac address per client on WLC !!!!!!

Category:DefaultRelease time:-0001-11-30Views:130

Dear all, First, thank for read my topic, now i have a small trouble with WLC. My company have 12 APs & Cisco 5508 WLC, all things work well. We already setup a WLAN for user can connect to internet (using local net users account), but they using the[More]

Hot
Hi, There is a problem with low efficiency of automatically connect to Wi-Fi with my ipad2. It would not take quite long time to connect to wifi with my iphone and imac, but only happened on my ipad2. any helps would be appraciated ! ThanksHi, Justin [More]
Hi there Im using FCC to create a flat file, I have to specify the field lengths and If I miss something it takes forever to get the faulty value. If I have an error like this, is there a way to pin point the line that has the problem? Message proces [More]
Hi, i've an issue on Production Environment. When i use a variable (both declaring or setting) i retrieve an error. "com.sunopsis.core.SnpsInexistantObjectException: SnpSessTaskLog.getObjectByIdent : SnpSessTaskLog does not exist" I've checked a [More]
Cannot locate iphone 4S in Itunes, using Windows vista, device driver in-compatible driver thinks its digital camera.Please helphttp://support.apple.com/kb/TS1538Read other 2 answers [More]
Hello, A few days ago a podcast I am hosting started acting odd. If I add a new graphic element to the site, ALL graphic elements get moved around, stretched, rotated, etc. This DOESN'T happen when I publish to a folder. I managed to do some workarou [More]
Hi! We need to display a CR in the Portal. The CR is based on a MDx BW Query. To create and display the report is no problem. Even saving back to BW is working fine. But how do we get this CR displayed in the EP? Thanks in advance JörnHi, Should only [More]
Hi All, I have oppty fact table and product dimension table. I have to create calculation columns credit revenue = ( sum( opptyfact. Revenue where product. productgroup = "credit")) Debit revenue = (sum( opptyfact. Revenue where product. product [More]
Hi! I have searched the forums for this, but not been able find someone describing the same problem. I am using Acrobat 5.0.5. I frequently get the message 'There was an error opening this document. The file is damaged and could not be repaired' when [More]
Hi, I'm trying to generate client code from WSDL with wsimport maven goal. I can generate the code, but I have this specific problem which I'm trying to solve by jaxb and jaxws external binding files. In my src/main/resources/wsdl directory I have - [More]
Hi, We have IBM Websphere Application Server on one unix server which is connecting to a Oracle 10g RAC Instance which is on a different unix server through JDBC connection. They(Application Team) are doing stress tests, please tell me how many conne [More]